top of page

Tanımla, Tasarla, Uygula

 

Problemin çözümü için net bir tanımlama yapabilmek için sizlerle yakın çalışarak problemin doğru ve eksiksiz tanımlandığından emin olacağız. 

3D tasarım yazılımları kullanılarak, imalat başlatılmadan önce, çözüm ekranda 3D olarak görüntülecektir. 

Herhangi bir imalat öncesinde, birlikte çalışarak, her aşama için en uygun çözümü bulacak ve beklentilerinizin tam olarak karşılandığından emin olacağız.

CAD Modelleme Servisi - Akıldaki uygulama ile birlikte

Revenisis'te, ileri seviye CAD modelleme becerilerimiz farklı endüstrilerdeki deneyimlerimizin bir araya gelmesinden doğmaktadır. Farklı endüstrilerden gelen deneyimlerimiz, yapmakta olduğumuz modelleme prosesi için bizlere yüksek seviyede bir kavrama kazandırmaktadır. Tersine mühendislik prosesimiz parçanın değerlendirilmesi ile birlikte başlamaktadır. Hassasiyet beklenti seviyesi, proje hedefleriniz ve ürünün nihai kullanımı değerlendirmemiz gereken unsurlardır. Tersine mühendislik için gerekli unsuzrlar değerlendirildikten sonra size gerekli olacak çıktıların seviyesini belirlemekteyiz. Projeniz için en uygun olan çıktıları değerlendirebilirsiniz.

Non-parametric yüzeyler, NURBS yüzeyler olarak bilinir, cad içinde en yüksek seviye doğruluğu verir, cad içi kullanıma hazır. Organic yüzeyler ile en yaygın kullanılanlardır.Note: elemanlar edit edilebilir olmazlar.

 

Bütün yüzey çeşitleri orjinal yüzeyden oluşturulmaktadır - gerekirse doku dahil olmak üzere. Sonuçların doğruluğu tarama "post-processing" te atılan adımlara çok bağlıdır. Takım işleme elektrotlarının veya başka bir CNC kesim işleme datalarının çıkarılmasında doğruluğu en yüksek tersine mühendislik yöntemdir.

Dosyalar IGES çıkış veya STEP biçimidir.

Hybrid parametric/non-parametric models are used when parametric shapes and complex organic surfaces exist in the same component.

Multiple scanning technologies are used when the project calls for higher levels of precision in select areas of the part. Micro-laser scanning will capture surface finish detail often needed for Class-A tooling.

 

Files are output in IGES or STEP format.

 

Polygonal models offer the highest level of surface accuracy, but have limited use. These are non-editable reverse engineering files that are very large in size and can be read directly into 3D printing rapid prototyping technology.

 

Files are output in STL format.

 

Using our technologically advanced CAD modeling services, we'll arrive at a model that accurately reflects the original you provided, one that you can quickly put to use in the next step of your project.

 

 

Call us for more information at any time! (282) 726 2960

Eskiyen parçaların yeniden kullanımı ile pahalı değişim ve uzun tedarik zamanlarından kaçınılması

Birçok parça aşınmakta veya kırılmaktadır, ama parçanın yenisi ile değiştirilmesi tek çözüm değildir. Aşınma / Hasar derecesine bağlı olarak, biz REVENİSİS olarak sizlere tamir ve ıslah çözümleri sunabilir ve böylelikle size para kazandırabiliriz.

 

Parça hasar ve arızaları aşağıda sıralanan ektenler ile doğrudan ilişiklidir; (sürtünme, korozyon, erozyon, kimyasal saldırı, orjinal dizaynların kusurlu yapılmış olması yada yanlış malzeme seçimleri)

Revenisis'te bulunmakta olan ekibimiz ile hizmet vermekte olduğumu konular; ( yüzey tasarım, tamir&ıslah tekniklerinde uzmanlaşmış deneyim birikimi)

 

Üç adımda REVENİSİS sizlere çözüm sunabilecektir.

  1. Yerinde inceleme ve veri toplama

  2. Parça muayene ve aşınma/başarısızlık mod soruşturma

  3. Mühendislik çözüm önerilerinde bulunmak ve onun geliştirmesini kolaylaştırmak.

 

Eğer kesintilerinizi azaltabilir misiniz diye öğrenmek isterseniz, bugün bizi arayın ve uzaman ekibimiz ile bir görüşme ayarlayın.

Reverse Engineering

This function can best be described as the process of measuring an existing physical item which has not been previously developed in a 3D cad package, typically by 3D scanning or point probe digitising and using the resulting data to create a fully engineered cad model, combining design intent and all the manufacturing and packaging requirements. In other words using a physical part to create a full digital replica to original design intent. This is a core part of our business. We have many years of CAD experience and this allied to our range of 3D scanning technology allows us to provide a full and comprehensive service. Reverse engineering should not be confused with digital.

We can supply a range of formats as the deliverable.

This service is ideal for tool or mould makers. We can take current production parts or tooling with no existing 2D drawings or 3D cad models and use these as reference for creating a full design model. This is particularly useful where tolls are worn or coming to the end of their productive life. This process is also specially appropriate on legacy parts.

Reverse Engineering


​​

Traditional Reverse Engineering is the process of taking scan data from a physical object to create a robust CAD format consequently giving the capability to re-engineer (modify or update) the part.

Many companies approach 3D Scanners UK Ltd to reverse engineer parts because the cad for the original part does not exist. Other reasons for reverse engineering parts can be to develop the existing part further and increase manufacture and overall production times.

3D Scanners is the leading provider of an international Bureau service for non-contact digitising and surfacing.

Having had so many years experience using 3d scanners for reverse engineering, and having access to a wide range of systems, 3D Scanners UK Ltd know the most appropriate solution to use for the customers requirements. This in turn provides a flexible and cost efficient service for our customers, without the requirement to purchase costly equipment.

 

What do I Need?

he model to the left is a polygon mesh (stl).

Many customers ask us to produce a polygon mesh for rapid prototyping. 9 out of 10 companies can create a rapid prototype straight from a mesh but it is always best to check that the company you have chosen to work with are able to do so.

Other customers may be creating 3d catalogues of objects, comparing meshes for quality purposes or the customer may want to produce a 3d geometric model within their own software from the supplied mesh.

The polygon model on the left has been used as a template to create a 3d geometric solid model in a software program such as SolidWorks.

A colourmap can then be used in PolyWorks to analyse deviation between the mesh and the newly created geometric 3d model, which can be then saved as an iges,obj,step etc.

At 3D Scanners we can create a polygon mesh, or a 3d geometric model for you.

We can also create a rapid surface (iges, step) from a 3d mesh, this is shown in the picture on the data aquisition page.

Our team of highly trained specialists are committed to offering a fast, innovative and flexible reverse engineering service – tailored to each customers requirements.

Reverse Engineering

Production lines rely on the successful integration of manufacturing equipment with often-complex flowthrough processes.  It can take just one component failure to disrupt the smooth running of a line, leading to down time and lost output.

The scale of the problem can be made worse if the drawings on which the failed part is based cannot be located.  This is where PPSI Manufacturing can assist through reverse engineering.

We are able to create 3D images of manufactured parts when a blueprint is not available, or where its production predated CAD CAM technology, as the first step towards remanufacturing the component.

The failed component is scanned by our coordinate measuring machine (CMM). As it is measured, a 3D wireframe image is generated. After completing the measurement, we then dimension the wireframe and create the appropriate drawing ready for remanufacture.  

What's more, you may not need to disassemble vital machinery and send a failing part to us for re-engineering.  Our Faro Portable CMM can be despatched to site when you have scheduled machine maintenance.  We will then scan the removed part, create a new part from the scan, and return it to you for insertion at another scheduled machine maintenance opportunity, enabling you to switch to the newly manufactured component with the minimum of production downtime

When a key component fails, or is in need of renewal, the drawing from which it was originally manufactured may not be available. In these circumstances, it is vital that a solution is found - which is where PPSI Manufacturing can assist through reverse engineering. We possess the skills and the technology to remanufacture critical components.

bottom of page